Cadmium Telluride

Del Mar Photonics

Below is a list of crystals available from stock. Please e-mail us to receive a quote for one of those crystals or to request a custom quote.

CdS
CdSe
CdTe
CdTe doped
CdZnTe
ZnS
ZnSe
ZnSe polycrystalline targets
ZnSe:Te
ZnSe with different dopants
ZnTe
Mn- & V-doped II-VI compound crystals
Cr-doped II-VI compound crystals
GaSe
PbS, PbSe, PbTe
Bi₂Se₃, Bi₂Te₃
CdWO₄
NaBi(WO₄)₂
Powders and crystal pieces of metal chalcogenides
GaP & InSb (out of production)

CdTe

#	Art.
1	CdTe (110), 10´8´3 mm, 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm), n-type.
2	CdTe, 5´5´1.3 mm, (110) at 45^o to 5´5 mm, 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
3	CdTe, 6´4´2 mm, 6´4 // (111), all sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
4	CdTe, Æ 6´8 mm, Æ 6 //(111), high resistivity (³ 10⁶ Ohm´cm)
5	CdTe, 30´2´1 mm, 30´2 // (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
6	CdTe, 30´3´3 mm, 30´3 // (111), 3´3 // (110), all sp 60/40, high resistivity (³ 10⁶ Ohm´cm)
7	CdTe, 10´10´0.5 mm, (110), 1 side polished 60/40, 1 side fine grinded, low resistivity, p-type
8	CdTe, 10´10´0.2 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
9	CdTe, 10´5´1 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
10	CdTe, 5´5´2 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
11	CdTe, 10´10´0.5 mm, (100), 1 side polished 60/40, 1 side fine grinded, p-type
12	CdTe, 10´10´0.5 mm, random oriented, 1 side polished 60/40, 1 side fine grinded, p-type
14	CdTe, 10´10´0.5 mm, (100), 2 sides polished 60/40, p-type
15	CdTe, 10´10´0.5 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
16	CdTe, 10´10´1 mm, (100), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
17	CdTe, 10´10´0.5 mm, (110), 1 sp., high resistivity (³ 10⁶ Ohm´cm)
18	CdTe (110) Diam. 20x2 mm, 2 sp., clear aperture diam. 14 mm, high resistivity (³ 10⁶ Ohm´cm)
19	CdTe, 5´3´3 mm, 5´3 // (111), 3´3 // (110), all sp 60/40, high resistivity (³ 10⁶ Ohm´cm)
20	CdTe, 10´10´0.6 mm, (110), 2 sides polished mechanically then chemically, high resistivity (³ 10⁶ Ohm´cm)
21	CdTe (111) Diam. 5 x 5 mm, 2sp., high resistivity (³ 10⁶ Ohm´cm)
22	CdTe window Diam. 25.4 x 1 mm, 2 sp., high resistivity (³ 10⁶ Ohm´cm)
23	CdTe, 10x10x0.5 mm, (111), 1 sp., high resistivity (³ 10⁶ Ohm´cm)
24	CdTe, 10x10x1 mm, (111), 2 sp., high resistivity (³ 10⁶ Ohm´cm)
25	CdTe, 10x10x1 mm, (110), 1 sp., high resistivity (³ 10⁶ Ohm´cm)
26	CdTe, 10x10x1 mm, random oriented, 1 sp., high resistivity (³ 10⁶ Ohm´cm)
27	CdTe, 10x10x1 mm, (110), 2 sp., high resistivity (10⁹ Ohm´cm), n-type
28	CdTe, 10´10´3 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
29	CdTe, 10´10´5 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
30	CdTe, 10´10´10 mm, (110), 2 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
31	CdTe, 6x6x1 mm, (110)/(110)/(100), 6x6 mm = (110), 6x1 mm (110) side marked. 2 sp. 40/20, high resistivity (³ 10⁶ Ohm´cm)

CdTe doped

#	Art.
1	CdTe, V-doped (0.15 %), 7´5´0.5 mm, (110), 3 sides polished 60/40, high resistivity (³ 10⁶ Ohm´cm)
2	CdTe, V-doped (0.08 %), (110), 10x10x1 mm, 2 sp.
3	CdTe, V-doped (0.08 %), random oriented, 10x10x1 mm, 2 sp.
4	CdTe, Ge-doped (0.1 %), 5x5x5 mm, (110) faces polished, (111) face grinded
5	CdTe, Li-doped (5*10¹⁶ cm^-3), 10x10x0.5 mm, (111), 2 sides grinded
6	CdTe, Li-doped (5*10¹⁸ cm^-3), 10x10x0.5 mm, (111), 2 sp.
7	CdTe, Li-doped (5*10¹⁸ cm^-3), 10x10x0.5 mm, random oriented, 2 sp.
8	CdTe, Mn-doped (5*10¹⁶ cm^-3), 10x10x0.5 mm, (111), 2 sp.
9	CdTe, Mn-doped (5*10¹⁸ cm^-3), 10x10x0.5 mm, (111), 2 sp.
10	CdTe, Mn-doped (5*10¹⁸ cm^-3), 10x10x0.5 mm, random oriented, 2 sp.
11	CdTe, Fe-doped (5*10¹⁸ cm^-3), 10x10x0.5 mm, (111), 2 sp.
12	CdTe, Fe-doped (5*10¹⁸ cm^-3), 10x10x0.5 mm, random oriented, 2 sp.

CdZnTe

#	Art.
1	Cd_0.9Zn_0.1Te, random oriented, 6 N purity, 10´10´1 mm, 2 sp.
2	Cd_0.9Zn_0.1Te, random oriented, 5 N purity, Diam. 40x3.5 mm, 2 sp.
3	Cd_0.9Zn_0.1Te, random oriented, 5 N purity, Diam. 38.1x1.2 mm, 2 sp.
4	Cd_0.9Zn_0.1Te, random oriented, 6 N purity, 15´15´1 mm, 2 sp.

ZnS
(doped ZnS crystals see below in separate tables)

#	Art.
1	ZnS 6´4´2 mm, orientation: random, allsides 60/40 polished
2	ZnS multispectral windows Æ 13´0.5 mm
3	ZnS multispectral window 4´4´20 mm, 4´20 mm sides 60/40 polished
4	ZnS 10´5´5 mm, 5´5 sides // (110) & 60/40 polished, other sides fine grinded
5	ZnS multispectral window Æ 17´2 mm with center hole Æ 1 mm
6	ZnS multispectral windows Æ 17´2 mm with center hole Æ 1.5 mm
7	ZnS multispectral windows Æ 17´2 mm with center hole Æ 2 mm
8	ZnS multispectral windows Æ 8´5 mm
9	ZnS (110) Diam. 10 x 1 mm, 2 sp., clear aperture 8.5 mm
10	ZnS multispectral blanks Æ 25.4´1 mm, (110), inspection polished
11	ZnS, Æ 10´0.3 mm, (110), polished 60/40
12	ZnS (110), 12´6´1.5 mm, 2 sides 60/40 polished
14	ZnS (110), 10´10´0.5 mm, 1 side 60/40 polished, 1 side fine grinded
15	ZnS (110), 5´5´1 mm, 2 sides 60/40 polished
16	ZnS (110), 10´10´1 mm, 2 sides 60/40 polished
17	ZnS (110), 10´10´0.5 mm, 2 sides 60/40 polished
18	ZnS (110), Æ 10´2 mm, 2 sides 60/40 polished
19	ZnS multispectral windows Æ 10´2 mm, 2 sides 60/40 polished
20	ZnS (110) 10´10´2 mm, 2 sides 60/40 polished
21	ZnS (110) 10´10´0.1 mm, 2 sides 60/40 polished
22	ZnS (110) Diam. 25.4 x 2 mm, 2 sp., Clear aperture 23 mm.
23	ZnS, multispectral windows Diam. 17x2 mm, 2 sp.
24	ZnS, (110), 5x5x1 mm, 1 side grinded, 1 side - cleaved surface.
25	ZnS (110), 10´10´0.5 mm, 2 sp. (Warning: these 11 plates have 99.995 % purity).
26	ZnS (110), 6´4´2 mm, all sides polished. 6x2 = (110); the (111) plane at 45 deg. to 6 mm side.

ZnSe
(doped ZnSe crystals see below in separate tables)

#	Art.
1	ZnSe powder 10-30 um (within 1 batch), 99.999 %
2	ZnSe multispectral window Æ 8´2 mm
3	ZnSe multispectral window Æ 28´5 mm, 2 sp.
4	ZnSe EOM blank 35´3.5´3.5 mm, 3.5´3.5 // (110), 1 side 35´3.5 // (100), inspection polished
5	ZnSe (110) 25.4x25.4x1 mm, 2 sp.
6	ZnSe 10´10´10 mm, random orientation, 6 sp.
7	ZnSe multispectral window Æ 29´2 mm, with center hole diam. 8 mm, 2 sp. 60/40
8	ZnSe 5´5´1 mm, (110), 1 side 60/40 polished, 1 side fine grinded
9	ZnSe 5´5´2 mm, (110), 2 sides inspection polished
10	ZnSe 10´10´1.2 mm, random orientation, 2 sides 60/40 polished
11	ZnSe 6´4´2 mm, 6´4 //(110), all sides 60/40 polished
12	ZnSe multispectral window Æ 13´0.5 mm
13	ZnSe 20.2´10.2´1.6 mm, (110), 2 sides polished
14	ZnSe EOM blank, (110)/(110)/(100), 1.5´1.5´30 mm, 1.5´1.5 // (110), 1.5´1.5 sides polished
15	ZnSe (110) Diam. 25.4 mm, Thickness: wedge 0.5 deg. (thickness of the thin side is 0.3 mm).
16	ZnSe rods, random oriented, Diam. 5 x 15 mm, side surface polished
17	ZnSe 10´10´1 mm, (110), 2 sides 60/40 polished
18	ZnSe 10´10´1 mm, (111), 2 sides 60/40 polished
19	ZnSe 10´3´1 mm, (110), 2 sides 60/40 polished
20	ZnSe multispectral window Æ 25´5 mm, 2 sp.
21	ZnSe 10´10´0.5 mm, (110), 2 sides 60/40 polished
22	ZnSe Æ 10´2 mm, (110), 2 sides 60/40 polished
23	ZnSe 10´10´0.5 mm, (111), 2 sides 60/40 polished
24	ZnSe multispectral window Æ 23´2 mm, 2 sp.
25	ZnSe (multispectral) plano-convex lens Diam. 6, R=250
26	ZnSe (multispectral) plano-convex lens Diam. 6, R=426.6
27	ZnSe multispectral window Diam. 12x2.7 mm, 2 sp., wedge 10'+/-2'
28	ZnSe (111) 25.4x4x1 mm, 2 sp. 60/40
29	ZnSe, random oriented, 20x20x2 mm, 1 side polished, 1 side fine grinded
30	ZnSe, random oriented, 20.2x10.2x1.6 mm, 2 sp.
31	ZnSe (multispectral), Brewster plate, 30x22x3 mm, 4 corner bevels 3x45 deg., 2 sp. 60/40
32	ZnSe multispectral window, Diam. 40x3.8 mm, 2 sp. 60/40
33	ZnSe random oriented rod, Diam. 10 x 96.75 mm, 2 surfaces diam. 10 are polished 60/40
34	ZnSe, random oriented, 16x9x1 mm, 2 sp.

ZnSe polycrystalline targets

#	Art.
1	ZnSe 5N polycrystalline target, 70x35x12 mm
2	ZnSe 5N polycrystalline target, diam. 60 x 6 mm
3	ZnSe 5N polycrystalline target, diam. 60 x 4 mm
4	ZnSe 5N polycrystalline target, diam. 100 x 10 mm
5	ZnSe 5N polycrystalline target, diam. 100 x 9.6 mm
6	ZnSe 5N polycrystalline target, diam. 105 x 10 mm

ZnSe:Te

#	Art.
1	ZnSe:Te (0.2 % Te) 15´12´0.8 mm, 2 sides 60/40 polished
2	ZnSe:Te (0.2 % Te) Æ 10´2 mm, 2 sides 60/40 polished
3	ZnSe:Te (0.2 % Te) Æ 25.4´2 mm, 2 sides 60/40 polished
4	ZnSe:Te (0.2 % Te) 10´10´2 mm, 2 sides 60/40 polished
5	ZnSe:Te (0.2 % Te) 10´10´1 mm, 2 sides 60/40 polished
6	ZnSe:Te (0.2 % Te) 10´10´0.5 mm, 2 sides 60/40 polished
7	ZnSe:Te (0.2 % Te) Æ 10´10 mm, all sides 60/40 polished
8	ZnSe:Te (0.5 % Te) 5´5´0.5 mm, 2 sides 40/20 polished
9	ZnSe:Te (0.5 % Te) Diam. 1´2 mm, 2 sp.

ZnSe with different dopants
(Cr & Mn doped ZnSe see below in separate tables)

#	Art.
1	ZnSe:Cu:Al (0.0065 % Cu & 0.001 % Al), 3x3x6 mm, all sides polished
2	Cd0.6Zn0.4Se, random oriented, 1.5x2.5x4 mm, all sp. 60/40
3	ZnSe:Fe, 4.9310¹⁷ cm^-3 Fe, 1010*1 mm, random oriented, 2 sp. 40/20

ZnTe

#	Art.
1	ZnTe 10´4.2´1 mm, (100), 2 sides polished 60/40, THz-quality material
2	ZnTe 5´5´0.1 mm, (110), 2 sides polished 60/40, THz-quality material
3	ZnTe 5´5´0.2 mm, (110), 2 sides polished 60/40, THz-quality material
4	ZnTe 2´2´1 mm, (110), 2 sides polished 60/40, THz-quality material
5	ZnTe (110) diam. 12.7 x 0.1 mm, 2 sp., THz-quality material
6	ZnTe 5´5´0.5 mm, (100), 2 sides polished 60/40, THz-quality material
7	ZnTe 5´5´0.5 mm, (110), 2 sides polished 60/40, THz-quality material
8	ZnTe (111) diam. 12.7 x 0.2 mm, 2 sp., THz-quality material
9	ZnTe 10´8´0.8 mm, (110), 2 sides polished 60/40, THz-quality material
10	ZnTe 1´1´0.5 mm, (110), 2 sides polished 60/40, THz-quality material
11	ZnTe 5´5´0.3 mm, (110), 2 sides polished 60/40, THz-quality material
12	ZnTe 10´10´0.3 mm, (110), 2 sides polished 60/40, THz-quality material
14	ZnTe 10´10´0.5 mm, (111), 2 sides polished 60/40, THz-quality material
15	ZnTe 5x5x0.5 mm, (110), 2 sp. 60/40, p-type, specific resistivity of about 10^3 Ohm*cm

Mn- & V-doped II-VI compound crystals

#	Art.
1	Zn_0.88Mn_0.12Se, (110), 5´5´1 mm, 1 sp
2	Zn_0.86Mn_0.14Se, (110), 5´5´1 mm, 1 sp
3	Zn_0.8Mn_0.2Te, (110), 5´5´1 mm, 1 sp
4	Zn_0.86Mn_0.14Te, (110), 5´5´1 mm, 1 sp
5	Zn_0.88Mn_0.12Te, (110), 5´5´1 mm, 1 sp
6	ZnSe:Mn (10^18 Mn) Diam. 38.1 x 0.5 mm, 2 sp., (111)
7	ZnS:Mn (0.45 % Mn), (111), 5x5x2 mm, 1 sp.
8	ZnS:Mn (0.45 % Mn), (111), 5x5x2 mm, all sides grinded
9	ZnTe:Mn:V ([Mn]=10¹⁹, [V]=510¹⁹ cm^-3), (110)/(110)/(100), 1010*5 mm, 2 sp.

Cr-doped II-VI compound crystals

#	Art.
	ZnS:Cr
1	ZnS:Cr (10¹⁸), (110), Æ 10´2 mm, 2 sp
2	ZnS:Cr (10¹⁹), (110), Æ 10´2 mm, 2 sp
	ZnSe:Cr
1	ZnSe:Cr (10¹⁸), (110), Æ 10´2 mm, 2 sp
2	ZnSe:Cr (10¹⁹), random oriented, Æ 10´2 mm, 2 sp
3	ZnSe:Cr (10¹⁹), (110), 10´10´10 mm, 6 sp
4	ZnSe:Cr (10¹⁸), (111), 10´10´10 mm, 6 sp
5	ZnSe:Cr (10¹⁶), (111), 10´10´10 mm, 6 sp
6	ZnSe:Cr (10²⁰), (111), 10x10x1 mm, 2 sp.
7	ZnSe:Cr (10¹⁷), (111), 10x10x1 mm, 2 sp.
8	ZnSe:Cr (10¹⁶), (110), Æ 10´2 mm, 2 sp
9	ZnSe:Cr (6*10¹⁸), random oriented, 5´2´4 mm, 2 sides (5x2 mm) polished
10	ZnSe:Cr (6*10¹⁸), random oriented, 5´2´5 mm, 2 sides (5x2 mm) polished
11	ZnSe:Cr (6*10¹⁸), random oriented, 5´2´6 mm, 2 sides (5x2 mm) polished
	ZnTe:Cr
1	ZnTe:Cr (0.05 at. %), (110), 10´10´0.35 mm, 2 sp
2	ZnTe:Cr (0.05 at. %), (110), 6´6´4 mm, all sides polished
3	ZnTe:Cr (0.05 at. %), (110), 10´6´1.5 mm, 2 sp

GaSe

#	Art.
1	GaSe, cleaved, 5´5´1 mm
2	GaSe, cleaved, 5´5´4 mm
3	GaSe, cleaved, 5´5´0.5 mm
4	GaSe, cleaved, 10´10´0.25 mm
5	GaSe, cleaved, 10´10´0.3 mm

PbS, PbSe, PbTe

#	Art.
1	PbSe, (100), Diam. 10x1 mm, 1 sp.
2	PbTe, p-type, (100), 10x10x1 mm, 2 sp.
3	PbTe, (100)/(100)/(110), 5x5x5 mm, all sides polished

Bi₂Se₃, Bi₂Te₃

#	Art.
0	*Sorry, currently out of the stock*

NaBi(WO₄)₂

#	Art.
0	*Sorry, currently out of the stock*

CdWO₄

#	Art.
1	CdWO₄, (010), Æ 50´0.3 mm, 1 side polished, 1 side fine grinded
2	CdWO₄, (010), 50´10´1 mm, 2 sides polished
3	CdWO₄, (010), 20x6x3 mm, 1 sp.
4	CdWO₄, (010), 25´15´0.13 mm, 2 sides polished
5	CdWO₄, (010), 60´20´0.3 mm, 2 sides polished
6	CdWO₄, (010), Æ 25.4´2 mm, 2 sides polished
7	CdWO₄, (010), 10´10´0.1 mm, 2 sides polished
8	CdWO₄, (010), 10´10´0.3 mm, 2 sides polished
9	CdWO₄, (010), 10´10´0.5 mm, 2 sides polished
10	CdWO₄, (010), 10´10´1 mm, 2 sides polished
11	CdWO₄, (010), 11´11´0.1 mm, 2 sides polished
12	CdWO₄, (010), 11´11´0.2 mm, 2 sides polished
14	CdWO₄, (010), 11´11´0.3 mm, 2 sides polished
15	CdWO₄, (010), Æ 12.2´0.2 mm, 2 sides polished
16	CdWO₄, (010), 50´10´0.5 mm, 2 sides polished

Powders & Crystal pieces of metal chalcogenides

#	Art.
1	ZnS 5N, 20 micron (approximately) powder
2	ZnSe 5N, 20 micron (approximately) powder
3	ZnSe 99.9 %, 20-50 micron (approximately) powder
3	CdS 5N, 20 micron (approximately) powder
4	CdSe 5N, 20 micron (approximately) powder
5	CdSe 99.995 %, powder
6	ZnTe 99.9 %, powder
7	PbS 5N, 1-3 mm (approximately) granules

GaP & InSb

#	Art.
1	GaP (110), 10x10x4 mm, 2 sp.
2	GaP (110), 10x10x0.5 mm, 2 sp.
3	GaP (110), 10x8x0.4 mm, 2 sp.
4	GaP (110), 10x8x0.2 mm, 2 sp.
5	InSb (110), Diam. 30 x 1 mm, 2 sp.

PRODUCTS

Bismuth chalcogenide crystals (Bi2Se3, Bi2Te3)
Cadmium Selenide (CdSe)
Cadmium Sulfide (CdS)
Cadmium Telluride (CdTe)
Cadmium-Zinc Telluride (Cd1-xZnxTe)
Cadmium Tungstate (CdWO4)
Crystal pieces of II-VI compounds (ZnSe, ZnS, ZnTe, CdSe, CdS, CdTe) for vacuum deposition
Equipment for crystal growth from the melt under high inert gas pressure (HPVB, HPVZM)
Gallium Selenides (GaSe, GaSe:In, Ga2Se3)
Lead chalcogenides (PbS, PbSe, PbTe)
Made to order DOPING of metal chalcogenide crystals
Made to order SYNTHESIS of metal chalcogenides
Made to order single crystals of molybdates and tungstates
TERNARY metal chalcogenide crystals
Zinc Selenide (ZnSe)
Zinc Selenide doped with tellurium (ZnSe:Te)
Zinc Selenide doped with Fe and Cr
Zinc Sulphide (ZnS)
Zinc Telluride (ZnTe)

We are looking forward to hear from you and help you with your optical and crystal components requirements. Need time to think about it? Drop us a line and we'll send you beautiful Del Mar Photonics mug (or two) so you can have a tea party with your colleagues and discuss your potential needs.

Del Mar Photonics, Inc.
4119 Twilight Ridge
San Diego, CA 92130
tel: (858) 876-3133
fax: (858) 630-2376
Skype: delmarphotonics
sales@dmphotonics.com