We have 3 options which are on the shelf and each has the 8-12 micron AR coating on them.
GE-W-25-2-AR812 (25.4 mm dia x 2 mm thick) in stock - request a quote
GE-W-38-3-AR812 (38.1 mm dia x 3 mm thick) in stock - request a quote
GE-W-50-3-AR812 (50.8 mm dia x 3 mm thick) in stock - request a quote
Germanium window, ø 25.4 mm x 3.0 mm
Ge optical grade
Type: circular plane window
Diameter: 25.4 mm (+0.0/-0.2 mm)
Thickness: 3 mm (+/-0.1 mm)
Surface quality: 40/20 scr/dig
Parallelism: 3 arc minutes
Clear aperture: 90% of diameter
New: meniscus lenses made of AMTIR-C1 and Germanium substrates with AR/AR coating at 3-5 and 8-12 microns.
Del Mar Photonics supply infrared optics from other materials including ZnSe, Germanium, Barium Fluoride, Calcium Fluoride IR grade and many others. E-mail us for custom quote or check our online store for items available in stock.
Germanium windows and their applications
Germanium is popular for its high index of refraction (around 4.0 from 2-14Ám
Germanium Windows for Thermography
The transmission of BBAR-coated germanium window.
Transmission spectrum of a Ge window
Thermal Runaway in Germanium Laser Windows
Lenses made out of germanium focus infrared light
Thermal imaging cover window, germanium cover windows, DLC coated ...
Our Thermal imaging Germanium cover windows are available with Anti reflection coatings on both sides, or with Hard Carbon Diamond coatings. ...
www.galvoptics.fsnet.co.uk/thermal_ge_windows.htm - 37k - Cached - Similar pages
Germanium lenses Infrared filters and window optics
Infrared Filters & Metalized Windows. Windows. Germanium Sapphire Zinc Sulfide Silicon Zinc Selenide. Filters.
Germanium Stock Windows
Germanium windows are available ex-stock
Germanium Window (Ge Window) widely used in IR sensors, thermal image, medical and other applications.
Germanium optics for pyrometry and thermography
BBAR coated Germanium windows for pyrometry and thermography.
Germanium FLIR optics ...
carbon hardened germanium window
germanium window, lenses
Germanium(Ge) Windows/Lenses Germanium is a commonly used infrared window material. It's popular for its high index of refraction and good IR transmission.
Battlefield-Ready Infrared Windows for Night Vision/Heat Detection ...
DLC multilayer coating
thermal infrared imaging flir camera
Diamond coated hardened carbon Germanium window.
A window fabricated from germanium is both electrically and thermally conductive.
Del Mar Photonics
Quantum Cascade Lasers Calibration
My application is calibrate the relative wavelength of tunable quantum cascade lasers in the mid-infrared (~10 microns). The laser itself is used for remote sensing of atmospheric gases.
FSR (Free Spectral
Range) is determined by etalon length L and wavelength of operation
FSR= (λ2) / (2*n*L)
The most popular
standard etalon is 1 inch long
For longer wavelength (> 10 micron) it's often necessary to use etalons 2-3 inches long to get required accuracy of calibration.
Del Mar Photonics offer variety of standard as well as custom germanium etalons.
Here are few examples of Ge etalon specifications:
etalon part number #GEFPE1/0.5
request a quote - sold in
Greyhawk Optics nline store as part number
Length 1.00 +/- 0.01 inch
Diameter 0.50 +/- 0.05 inch
1/4 lambda flat each end, HeNe
parallel to 3 ARC SEC or better
length measure to 0.0005"
surface quality F-f(80/50) per MIL-F-48616
Ge etalon part number #GEFPE3/1.25 - request a quote
Length 3.00 +/- 0.01 inch
Diameter 1.25+/- 0.05 inch
Other specification as in #GEFPE1/05
Ge etalon part number #GEFPE20mm/1.5
Ge etalon part number #GEFPE20mm/1.5 - request a quote
dia 38.1 (-0.1) mm
thickness: 20 (+/-0.1) mm
Flatness: 1 fringe ( Lambda/2 at 633 nm) , delta N = 0.2 fringes
Surface quality: 60-40 s/d
Parallelism: < 2 sec
Perpendicularity: 5 min
|Model||Product Name+||Buy Now|
|CPPE-Ge-38.1-4||Germanium circular plane parallel etalon, ø 38.1 mm x 4 mm|
|E-Ge-12.7-25.4||Germanium etalon, ø 12.7 mm x 25.4 mm (ø 0.5" x 1")|
Using Ge etalon in gas sensing project involving quantum cascade lasers
Jagadeeshwari (Esha) Manne, PhD student, University of Alberta
Project: Infrared absorption
spectroscopy with Quantum cascade laser.
I am a graduate student pursuing my doctoral studies at the University of Alberta. The Ge- etalon will be used for non-profit research here at the university. I am presently working on a gas sensing project involving Quantum cascade laser.
The mid-IR region is ideally suited for absorption spectroscopy since the fundamental vibrational transitions of a number of molecules lie here. Quantum cascade (QC) lasers fabricated by band structure engineering offer an attractive new option for sensitive IR absorption spectroscopy. Distributed feed-back pulsed QC lasers are of particular interest for they allow the realization of a room temperature, compact IR source with relatively high output power. In particular, their combination with the pulsed-CRDS technique has the potential for high sensitivity trace gas analysis. The goal of our present work is to develop a technique for quantitative online analysis of trace constituents in exhaled breath. We are using pulsed-CRDS technique in combination with a mid IR QC laser operating near 970 cm-1 to measure ammonia levels in exhaled breath. An unlocked ring-down cavity was designed for these studies which can be operated at atmospheric or reduced pressure. We have already attained a detection limit of 25 ppb for ammonia. We are in a process of improving the system to get down to sub ppb levels with this technique.
The etalon will be used for characterization of the laser which would be an important step in choosing the right parameters for the laser for gas-sensing applications.
Del Mar Photonics
Del Mar Photonics featured components
Del Mar Photonics continuously expands its components portfolio.
Prisms for Concentrating Photovoltaic Systems (CPV)
Solar cells made of compound semiconductors such as gallium arsenide are very expensive. Usually very small cells are installed and various means such as mirrors, lenses, prisms, etc..are used to concentrate sunlight on the cells. Concentration photovoltaic technology (CPV) uses the solar radiation with an efficiency of 40%, double that of conventional solar cells
Del Mar Photonics design custom Concentrating Photovoltaic Systems (CPV) and supply variety of the optical components for CPV such as solar prisms shown in the picture.
Axicon lens also known as conical lens or rotationally symmetric prism is widely used in different scientific research and application. Axicon can be used to convert a parallel laser beam into a ring, to create a non diffractive Bessel beam or to focus a parallel beam into long focus depth.
Del Mar Photonics supplies axicons with cone angles range from 130░ to 179.5░ for use with virtually any laser radiation. We manufacture and supply axicons made from BK7 glass, fused silica and other materials.
download brochure - request a quote
Rutile (TiO2) coupling
Del Mar Photonics offers optical elements made of high quality synthetically grown Rutile Titanium Dioxide crystals. Rutileĺs strong birefringency, wide transmission range and good mechanical properties make it suitable for fabrication of polarizing cubes, prisms and optical isolators. Boules having high optical transmission and homogeneity are grown by proprietary method. Typical boules have 10 - 15 mm in dia. and up to 25 mm length. Optical elements sizes - from 2 x 2 x 1 mm to 12.7 x 12.7 x 12.7 mm. Laser grade polish quality is available for finished elements. So far we the largest elements that we manufactured are 12 x15 x 5 mm, in which optical axis is parallel to 15 mm edge, 5 mm is along beam path, 12 x 15 mm faces polished 20/10 S/D, one wave flatness, parallelism < 3 arc.min. (better specs. available on request).
more details - download brochure - request a quote
Del Mar Photonics offer a range of competitively priced UHV viewports , Conflat, ISO or KF including a variety of coatings to enhance performance. Del Mar Photonics viewports are manufactured using advanced techniques for control of special and critical processes, including 100 percent helium leak testing and x-ray measurements for metallization control. Windows Materials include: Fused silica, Quartz , Sapphire , MgF2, BaF2, CaF2, ZnSe, ZnS, Ge, Si, Pyrex. Standard Viewing diameters from .55" to 1.94 ".
Coating - a range of custom coatings can applied - which include
- Single QWOT
- Broad Band AR
- V coatings
- DLC (Diamond like coating)
more details - request a quote
Thyratrons are used in
such devices as radars with different power levels, high-power pulsed
technical, electrophysical, medical devices and lasers. Sophisticated
design and high quality ceramic-metal envelope determines long lifetime
and very accurate and reliable operation of hydrogen thyratrons under wide range of environmental
- pulsed lasers power supplies
- medical apparatus
- electrophysical instrumentation
Triggered Three-Electrode Spark Gap Switches are ceramic-metal sealed off gas discharge trigatron-type devices with a co-axial trigger electrode. These Gas Discharge Tubes contain no mercury and, due to an advanced design, feature high reliability and a long lifetime being operating under wide range of environmental conditions.
- pulsed installation for processing materials
- installations with plasma focus
- pulse power supplies for lasers and other pulse equipment
- medical apparatus such as lithotriptors and defibrillators
- processing systems for petroleum wells
|We are looking forward to hear from you and help you with your optical and crystal components requirements. Need time to think about it? Drop us a line and we'll send you beautiful Del Mar Photonics mug (or two) so you can have a tea party with your colleagues and discuss your potential needs.|
Del Mar Photonics, Inc.
4119 Twilight Ridge
San Diego, CA 92130
tel: (858) 876-3133
fax: (858) 630-2376