Del Mar Photonics -
Newsletter
Trestles-100LH6 -
request a quote
LH6 DPSS pump laser 532 nm -
request a quote
Laser Output Characteristics
Average Output Power > 6 W
Wavelength 532 nm
Spectral Purity > 99.9 %
Spatial Mode TEM00
Beam Quality (M2) 1.0 - 1.1
Beam Ellipticity < 1.0 : 1.1
Beam Diameter 2.3 mm ± 10%
Beam Divergence < 0.5 mrad
Pointing Stability < 2 μrad/oC
Power Stability < ± 0.25 % rms
Low noise (NET) version: < 0.03 % rms
Polarization > 100:1 vertical
Power Requirements
Operating Voltage 100-240 VAC, 50 Hz / 60 Hz
Power Consumption 500 W max, 300 W typical
Laser Head Closed-loop chiller in Power Supply -
Cooler
Environmental Specifications
Operating Temperature 64-90 F (18-32 C)
Relative Humidity 8-85%, non-condensing
Laser Head - Physical
Dimensions (Height x Width x Length)
2.7 x 5.3 x 10.1 inches
(69 x 135 x 256 mm)
Weight 7.0 lbs (3.2 kg) approx.
Cable Length 10 " (3 m)
Power Supply-Cooler - Physical
Dimensions (Height x Width x Depth)
13.0 x 12.7 x 18.2 inches
(330 x 323 x 463 mm)
Weight 55 lbs (25 kg) approx.
 |
DPSS DMPLH lasers
DPSS DMP LH series lasers will pump your Ti:Sapphire laser.
There are LH series lasers installed all over the world pumping all makes & models
of oscillator. Anywhere from CEP-stabilized femtosecond Ti:Sapphire oscillators
to ultra-narrow-linewidth CW Ti:Sapphire oscillators. With up to 10 Watts CW
average power at 532nm in a TEMoo spatial mode, LH series
lasers has quickly proven itself
as the perfect DPSS pump laser for all types of Ti:Sapphire or dye laser.
Ideal for pumping of:
Trestles LH
Ti:Sapphire laser
T&D-scan laser
spectrometer based on narrow line CW Ti:Sapphire laser
|
Trestles 100 -
request a
quote
Ti:Sapphire oscillator having a tuning range of
710-960* nm (@6W pump);
output power >650 mW (@6W pump, 800 nm);
beam quality TEMoo; polarization - linear horizontal;
pulse duration <100 fs; repetition rate 80 MHz
*-with one extra set of optics (included)
Electronic starter with TTL output for mode-locked mode observation
USB-controlled tuning slit for wavelength tuning
SHG Trestles -
request a
quote
Second Harmonic Generator (SHG) for Trestles femtosecond Ti:sapphire lasers
SHG unit for Ti:Sapphire femtosecond lasers
Input wavelength for SH: 710-960 nm
Input pulse width: >20 fs
Conversion efficiency: >22% (@800 nm, depends on
input parameters)
Temporal broadening :<100 fs
Input average power: >300 mW
Reef-M real-time scanning autocorrelator for microscopy -
request a quote
Collinear (interferometric) autocorrelation
Wavelength range, nm: 700-1300
Pulse duration range, fs: 20-12000
Input repetition rate: >10 kHz
Sensitivity: <100 mW^2
Input polarization: horizontal
Scanning rate, Hz: 0.1-20
Linear distortion, %: <1%
Photodetectors: internal and external, switchable
Necessary equipment: PC with USB or oscilloscope
Dimensions, mm:
210x164x132 (optical head)
225x190x45 (electronic unit)
70x55x16.5 (external photodetector)
Acquisition and analysis PC software included
Trestles PSC 800-13000 -
request a quote
Pulse stretcher/compressor
Wavelength range, nm: 700-900
Introduced dispersion@800 nm, min-max, fs^2:
(+1000) - (-13000)
Additional internal beam path, m: 2.8
Transmission: >90%@800 nm
Input polarization, linear: horizontal
Maximum input beam diameter, mm: 4
FemtoViewer for alignment of Ti:Sa lasers -
request a quote
Spectral response up to 1300 nm
 |
Near IR viewers
Femtoviewer
High performance infrared
monocular viewers are designed to observe radiation emitted by
infrared sources. They can be used to observe indirect radiation of IR
LED's and diode lasers, Nd:YAG, Ti:Sapphire, Cr:Forsterite, dye lasers and
other laser sources. IR viewers are ideal for applications involving the
alignment of infrared laser beams and of optical components in
near-infrared systems. Near IR viewers
sensitive to laser radiation up to 2000 nm.
The light weight, compact monocular may be used as a hand-held or facemask
mounted for hands free operation.
Ultraviolet viewers are
designed to observe radiation emitted by UV sources. |
