Femtosecond Laser System Delivered to Govt. College University, Lahore,
Pakistan
Trestles 50 one-box femtosecond Ti: sapphire oscillator:
Pulse duration: < 50 fs
Tuning range: 750 nm 850 nm
Output power at 800 mW: > 400 mW
Pulse repetition rate: 83 MHz
Output beam diameter: 2-3 mm
Built-in 5W HPG Elforlight diode pumped solid state pump laser is included
Installation is included
Wedge 50 femtosecond multipass Ti: sapphire amplifier
including pulse stretcher,
pulse compressor, pulse picker, synchronization electronics, and Darwin 527-30M
diode pumped Nd: YLF pump laser with chiller:
Pulse rep. rate: 1 kHz, single shots are possible
Operation wavelength: 800 nm ±20 nm
Output pulse energy: 1 mJ at 1 kHz
Pulse duration: < 50 fs
Installation is included
Reef femtosecond single-shot autocorrelator
Laptop computer with ACore software for autocorrelation function measurements
Thorlab 2.5 x 1.25 m Stable Top 350 Series I optical table with Pump & Go
isolators, set of 4
On-line UPS compatible with laser system and chiller having online 30% extra
load capacity for the system and minimum 10 minute backup time
Fieldmaster GS power meter with LM10 head
Diode laser for beam aligner, included to the item 2
Optical tissue, included to the tem 2
Protective eyewear compatible with laser system wavelength, included to the item
2
Laser beam focusing lenses of focal length 10, 20, 50 cm diameter 5 cm
Window having maximum transmission at laser wavelength of diameter 5 cm
Request a quote for similar configuration
Product Data Sheets
Del Mar Photonics Product brochures - Femtosecond products data sheets (zip file, 4.34 Mbytes) - Del Mar Photonics
Send us a request for standard or custom ultrafast (femtosecond) product
Pulse
strecher/compressor
Avoca SPIDER system
Buccaneer femtosecond
fiber lasers with SHG Second Harmonic Generator
Cannon Ultra-Broadband Light
Source
Cortes Cr:Forsterite
Regenerative Amplifier
Infrared
cross-correlator CCIR-800
Cross-correlator Rincon
Femtosecond Autocorrelator
IRA-3-10
Kirra Faraday Optical Isolators
Mavericks femtosecond
Cr:Forsterite laser
OAFP optical attenuator
Pearls femtosecond fiber laser
(Er-doped fiber, 1530-1565 nm)
Pismo pulse picker
Reef-M femtosecond scanning
autocorrelator for microscopy
Reef-RTD scanning
autocorrelator
Reef-SS single shot
autocorrelator
Femtosecond Second Harmonic Generator
Spectrometer ASP-100M
Spectrometer ASP-150C
Spectrometer ASP-IR
Tamarack and Buccaneer
femtosecond fiber lasers (Er-doped fiber, 1560+/- 10nm)
Teahupoo femtosecond Ti:Sapphire regenerative amplifier
Femtosecond
third harmonic generator
Tourmaline femtosecond fiber
laser (1054 nm)
Tourmaline TETA Yb
femtosecond amplified laser system
Tourmaline Yb-SS
femtosecond solid state laser system
Trestles CW Ti:Sapphire
laser
Trestles femtosecond
Ti:Sapphire laser
Trestles Finesse
femtosecond lasers system integrated with DPSS pump laser
Wedge Ti:Sapphire multipass amplifier
Ti:Sapphire Laser Kits
We are approaching new phase when more and more community colleges and
relatively small Universities want to add femtosecond lasers to their research
and education labs. They want to get basic kits to teach students from
ground up. Del Mar Photonics has a special offer how build femtosecond laser
educational course in the most economical way.
The easiest way is to start from CW Ti:Sapphire laser and later upgrade to
femtosecond laser. Note that in order to upgrade to fs it's necessary to have fs mirrors
initially (2 sets to cover whole range). It's also possible to start with a single CW 700-1000 set, and then
add two fs
sets later.
The specifications for the kit with femtosecond mirrors are as follows:
CW Ti:Sapphire laser kit
Tuning range (@10W pump): 710-980 (two optics sets) or 730-870 nm (one optics
set)
CW output power (@10 W pump, 800 nm): >1800 mW
CW wavelength tuning is available only with appropriate options (see below)
CW linewidth:
<45 GHz
<20 GHz (with 1 etalon)
<2 GHz (with 2 etalons)
Femtosecond Ti:Sapphire laser kit
Fs output power (@10W pump, 800 nm): >1300 mW
Repetition rate: 80 MHz
Pulse duration: <100 fs
Spatial mode: TEMoo
Polarization: linear horizontal
Note: Closed-loop chiller or tap water circulation required for operation
(included in the recommended pump laser)
Del Mar Photonics can offer:
CW Ti:S laser kit with small breadboard, one mirror set -
request a quote
CW kit setup with manual BRF (birefringent filter) shown together with a green DPSS pump laser, laser power meter and spectrometer
fs upgrade (2 prisms combined
with manual wavelength tuning slit assembly, additional mirror with mount) -
request a quote
Additional options and components:
Additional mirror set -
request a quote
Main breadboard (houses all elements) and cover box -
request a quote
Upgrade to thermally stabilized main breadboard for greater stability -
request a quote
CW options:
Manual 3-plate BRF filter for CW wavelength tuning -
request a quote
USB 3-plate BRF for CW wavelength tuning with software -
request a quote
Thick (thin) etalon with mount (manual tuning) -
request a quote
Thick (thin) etalon with mount (step motor controlled tuning) -
request a quote
fs options:
Electronic starter with TTL output for femtosecond Ti:sapphire laser kit
-
request a quote
Upgrade to USB step motor controlled tuning slit with software -
request a quote
| Ti:Sapphire Laser kits | |
| Model | Product Name+ | Price | Buy Now |
| CW-Ti:Sa-Kit-Basic | CW Ti:S laser kit with small breadboard, one mirror set | $14,250.00 |
 |
| FS-Upgrade | FS upgrade for CW-Ti:Sa-Kit-Basic | $4,950.00 |
|
| FS-CW-Ti:Sa-Kit-Basi | FS CW Ti:Sa laser kit with small breadboard, one mirror set | $19,200.00 |
|
| Additional mirror set | $1,980.00 |
|
|
| Main breadboard (houses all elements) and cover box | $2,310.00 |
|
|
| Upgrade to thermally stabilized main breadboard for greater stability | $2,640.00 |
|
|
| USB 3-plate BRF for CW wavelength tuning with software | $5,370.00 |
|
|
| Manual 3-plate BRF filter for CW wavelength tuning | $3,550.00 |
|
|
| Thick (thin) etalon with mount (manual tuning) | $870.00 |
|
|
| Thick (thin) etalon with mount (step motor controlled tuning) | $2,775.00 |
|
|
| Electronic starter with TTL output for femtosecond Ti:sapphire laser kit | $2,800.00 |
|
|
| Upgrade to USB step motor controlled tuning slit with software | $2,750.00 |
|
 |
Trestles LH Ti:Sapphire
laser Trestles LH is a new series of high quality femtosecond Ti:Sapphire lasers for applications in scientific research, biological imaging, life sciences and precision material processing. Trestles LH includes integrated sealed, turn-key, cost-effective, diode-pumped solid-state (DPSS). Trestles LH lasers offer the most attractive pricing on the market combined with excellent performance and reliability. DPSS LH is a state-of-the-art laser designed for todays applications. It combines superb performance and tremendous value for todays market and has numerous advantages over all other DPSS lasers suitable for Ti:Sapphire pumping. Trestles LH can be customized to fit customer requirements and budget. Reserve a
spot in our Femtosecond lasers training
workshop in San Diego, California. |
 |
DPSS DMPLH lasers |
 |
New laser spectrometer
T&D-scan for research that
demands high resolution and high spectral
density in UV-VIS-NIR spectral domains - now available with
new pump option! The T&D-scan includes a CW ultra-wide-tunable narrow-line laser, high-precision wavelength meter, an electronic control unit driven through USB interface as well as a software package. Novel advanced design of the fundamental laser component implements efficient intra-cavity frequency doubling as well as provides a state-of-the-art combined ultra-wide-tunable Ti:Sapphire & Dye laser capable of covering together a super-broad spectral range between 275 and 1100 nm. Wavelength selection components as well as the position of the non-linear crystal are precisely tuned by a closed-loop control system, which incorporates highly accurate wavelength meter. Reserve a
spot in our CW lasers training
workshop in San Diego, California. |