Del Mar Photonics offers industry's most extensive portfolio of ultrafast
lasers
We offer femtosecond oscillators and amplifiers based on Ti:Sapphire
(Trestles, Teahupoo, Cortes), Cr:Forsterite (Mavericks, Jaws), Yb- Solid State
(Tourmaline-SS), Er-doped fiber
(Tamarack, Buccaneers) and Yb- doped fibers (Tourmaline series). Main
specifications of the basic standard models are summarized in the table below:
Laser brand-name | Brief description | Output parameters | Sample specifications | Pdf brochures |
Trestles | Ti:Sapphire oscillator | wavelength tuning range 710-950 nm (@6W pump); output power >600 mW (@6W pump, 800 nm) pulse duration <20 fs - 100 fs |
Trestles-100 without pump laser Ti:Sapphire oscillator having a tuning range of 710-950 nm (@6W pump); output power >600 mW (@6W pump, 800 nm); beam quality TEMoo; polarization - linear horizontal; pulse duration <100 fs; repetition rate 80 MHz |
Trestles
Ti:Sapphire laser Trestles Finesse Ti:Sapphire laser Manual Pump lasers DPSS DMPLH lasers HPG DPSS green laser Finesse DPSS green laser |
Teahupoo Rider | Ti:Sapphire one-box Oscillator/Amplifier |
|||
Mavericks | Cr:Forsterite oscillator | tuning range – 1230-1270nm output power – up to 1W pulse duration – 60 fs - 80 fs repetition rate – 120/76 MHz (fixed) |
Mavericks 65P Femtosecond Cr:Forsterite laser system Ytterbium pump laser included. tuning range – 1230-1270nm output power – 250 mW beam quality – TEMoo polarization – linear horizontal pulse duration – <65 fs repetition rate – 120/76 MHz (fixed) Electronic starter included. Peltier crystal head with temperature controller included. |
Mavericks Cr:Forsterite femtosecond lasers Multiphoton Imaging with Mavericks - introductory brochure New compact version of Mavericks CrF:65P chromium forsterite femtosecond laser
|
Tourmaline Yb-SS400 | Ytterbium-doped Solid- State Femtosecond Oscillator |
Wavelength, nm 1059±2 Pulse duration fs < 150 Output power, mW* >400 Repetition rate, MHz 80* |
Tourmaline Yb-SS400/150 Pulse duration (FWHM), fs < 150 Wavelength, nm 1059±2 Output power, mW* >400 Repetition rate, MHz 80* Output power stability** ± 1% (see graph) Spatial mode TEMoo Polarization, linear >100:1 (horizontal) Laser head dimensions, mm 710x165x110 Power supply dimensions, mm 230x200x85 |
Ytterbium-doped Solid- State
Femtosecond Oscillator |
Tamarack | Er-doped
fiber femtosecond oscillator |
Wavelength, nm 1560±10 Pulse Width, fs <80 - 250 Output power, mW >10 |
Tamarack 80 (RFQ) Pulse Width (FWHM), fs <80 Wavelength, nm 1560±10 Average output power, mW >10 Peak output power, kW up to 1 Repetition rate, MHz 70 Power output: 10 mW, TEM00, linearly polarized or fiber output (FC/APC) Laser head dimensions, mm 180x210x50 Power supply unit dimensions, mm 230x200x85 |
Tamarack
Er-doped femtosecond fiber laser |
Buccaneer | Er-doped
fiber femtosecond oscillator/amplifier |
Buccaneer 100 |
Buccaneer
Er-doped femtosecond fiber laser |
|
Buccaneer SHG | Er-doped
fiber femtosecond oscillator/amplifier +SHG |
Wavelength 780+-10 nm Pulse Width < 120 fs Output power >40 mW |
Buccaneer with a SHG unit Fiber laser with SH generation Pulse Width (FWHM) < 120 fs Wavelength 780+-10 nm (fixed) Average output power >40 mW Repetition rate 40 MHz Spectral width ~ 7.5 nm RF Out: SMA Mode lock status: SMA Polarization: vertical |
Buccaneer
Er-doped femtosecond fiber laser with build in SHG unit |
Tourmaline | Femtosecond Yb-based seed oscillator |
Output power 20mW Wavelength 1040-1064 nm Pulse duration 100 fs |
Tourmaline 100 Average power 20mW Wavelength 1040-1064 nm Repetition rate 60-80 MHz Pulse duration 100 fs Output pulse energy 0.25nJ |
Femtosecond Yb-based
seed oscillator |
Tourmaline 300-1 | Femtosecond Yb-based laser system |
Pulse duration 300 fs Average power 1 W |
Tourmaline 300-1 Yb-based laser system Pulse duration 300 fs Average power 1 W Repetition rate 10 kHz Pulse energy 100 mkJ
|
|
Tourmaline Yb- ULRepRate-07 |
Yb-based
high-energy fiber laser development kit, model Tourmaline Yb- ULRepRate-07 |
Wavelength: 1.07 nm ±0.1 nm Pulse duration: 500 fs - 3 ns Pulse energy: up to 10 µJ |
Tourmaline Yb-ULRepRate-07 Yb-based high-energy fiber laser system kit includes: - low-repetition-rate high-energy mode-locked Yb- doped all-fiber laser with open architecture which provides possibility of educational & experimental work for obtaining ultra-low-repetition-rate (up to 10 kHz) and study of parabolic shaped pulses Wavelength: 1.07 nm ±0.1
nm |
Product news and updates - Training Workshops - Featured Customer - Other News
Trestles LH Ti:Sapphire
laser Trestles LH is a new series of high quality femtosecond Ti:Sapphire lasers for applications in scientific research, biological imaging, life sciences and precision material processing. Trestles LH includes integrated sealed, turn-key, cost-effective, diode-pumped solid-state (DPSS). Trestles LH lasers offer the most attractive pricing on the market combined with excellent performance and reliability. DPSS LH is a state-of-the-art laser designed for today’s applications. It combines superb performance and tremendous value for today’s market and has numerous advantages over all other DPSS lasers suitable for Ti:Sapphire pumping. Trestles LH can be customized to fit customer requirements and budget. Reserve a
spot in our Femtosecond lasers training
workshop in San Diego, California. Come to learn how to build a
femtosecond laser from a kit |
|
DPSS DMPLH lasers |
|
New laser spectrometer
T&D-scan for research that
demands high resolution and high spectral
density in UV-VIS-NIR spectral domains - now available with
new pump option! The T&D-scan includes a CW ultra-wide-tunable narrow-line laser, high-precision wavelength meter, an electronic control unit driven through USB interface as well as a software package. Novel advanced design of the fundamental laser component implements efficient intra-cavity frequency doubling as well as provides a state-of-the-art combined ultra-wide-tunable Ti:Sapphire & Dye laser capable of covering together a super-broad spectral range between 275 and 1100 nm. Wavelength selection components as well as the position of the non-linear crystal are precisely tuned by a closed-loop control system, which incorporates highly accurate wavelength meter. Reserve a
spot in our CW lasers training
workshop in San Diego, California. Come to
learn how to build a
CW
Ti:Sapphire laser from a kit |
|
AOTF Infrared Spectrometer |
|
Open Microchannel Plate Detector
MCP-MA25/2 -
now in stock! |
|
Hummingbird EMCCD camera The digital Hummingbird EMCCD camera combines high sensitivity, speed and high resolution. It uses Texas Instruments' 1MegaPixel Frame Transfer Impactron device which provides QE up to 65%. Hummingbird comes with a standard CameraLink output. It is the smallest and most rugged 1MP EMCCD camera in the world. It is ideally suited for any low imaging application such as hyperspectral imaging, X-ray imaging, Astronomy and low light surveillance. It is small, lightweight, low power and is therefore the ideal camera for OEM and integrators. buy online |
|
Hatteras-D
femtosecond transient absorption data acquisition system Future nanostructures and biological nanosystems will take advantage not only of the small dimensions of the objects but of the specific way of interaction between nano-objects. The interactions of building blocks within these nanosystems will be studied and optimized on the femtosecond time scale - says Sergey Egorov, President and CEO of Del Mar Photonics, Inc. Thus we put a lot of our efforts and resources into the development of new Ultrafast Dynamics Tools such as our Femtosecond Transient Absorption Measurements system Hatteras. Whether you want to create a new photovoltaic system that will efficiently convert photon energy in charge separation, or build a molecular complex that will dump photon energy into local heat to kill cancer cells, or create a new fluorescent probe for FRET microscopy, understanding of internal dynamics on femtosecond time scale is utterly important and requires advanced measurement techniques. Reserve a
spot in our Ultrafast Dynamics Tools
training workshop in San Diego, California. |
|
Beacon Femtosecond Optically Gated Fluorescence Kinetic Measurement System
-
request a quote -
pdf Reserve a
spot in our Ultrafast Dynamics Tools
training workshop in San Diego, California. |
|
Terahertz systems, set ups and components New band pass and long pass THz optical filters based on porous silicon and metal mesh technologies. Band pass filters with center wavelengths from 30 THz into GHz range and transmissions up to 80% or better. Standard designs with clear aperture diameters from 12.5 to 37.5 mm. Long pass filters with standard rejection edge wavelengths from 60 THz into GHz range. Maximum transmission up to 80% or better, standard designs at 19.0 and 25.4 mm diameters. Excellent thermal (from cryogenic to 600 K) and mechanical properties THz products: THz Spectrometer kit with Antenna THz transmission setup THz time domain spectrometer Pacifica fs1060pca THz time domain spectrometer Pacifica fs780pca THz detectors: Golay cell and LiTaO3 piroelectric detectors PCA - Photoconductive Antenna as THz photomixer Pacifica THz Time Domain Spectrometer - Trestles Pacifica Holographic Fourier Transform Spectrometer for THz Region Wedge TiSapphire Multipass Amplifier System - THz pulses generation Terahertz Spectroscopic Radar Mobile System for Detection of Concealed Explosives Band pass filters with center wavelengths from 30 THz into GHz range Long pass filters with standard rejection edge wavelengths from 60 THz into GHz range Generation of THz radiation using lithium niobate Terahertz crystals (THz): ZnTe, GaP, LiNbO3 - Wedge ZnTe |
|
iPCA - interdigital Photoconductive Antenna for terahertz waves Large area broadband antenna with lens array and high emitter conversion efficiency iPCA with LT-GaAs absorber, microlens array for laser excitation wavelengths l £ 850 nm, adjusted hyperhemispherical silicon lens with a high power conversion efficiency of 0.2 mW THz power / W optical power. The iPCA can be used also as large area THz detector. The two types iPCAp and iPCAs have the same active interdigital antenna area but different contact pad directions with respect to the electrical THz field. Interdigital Photoconductive Antenna for terahertz waves generation using femtosecond Ti:Sapphire laser THz books |
|
IntraStage lowers the cost
of test data management! Struggling with gigabytes or terabytes of test data? IntraStage easily transforms test data from disparate sources into web-based quality metrics and engineering intelligence you can use.
Contact
us today to discuss your test management requirements and specifications of your
application. |
Training Workshops
Come to San Diego next summer! Attend one of our training workshops in San Diego, California
during summer 2011 Del Mar Photonics has presented training workshops for customers and potential customers in the past 3 years. Our workshops cover scientific basics, technical details and provide generous time for hands-on training. Each workshop is a three-day seminar conducted by professional lecturer from 10am to 4pm. It includes lunch, as well as a training materials. We have also reserved two days for Q&A sessions, one-on-one system integration discussions, social networking, and San Diego sightseeing.
The following training workshops will be offered during this
summer: |
Featured Customer
Trestles LH10-fs/CW laser system at UC Santa Cruz Center of Nanoscale Optofluidics
Del
Mar Photonics offers new
Trestles fs/CW laser system which can be easily
switched from femtosecond mode to CW and back. Having both modes of operation in one system dramatically increase a
number of applications that the laser can be used for, and makes it an ideal
tool for scientific lab involved in multiple research projects. |
|
Frequency-stabilized CW single-frequency ring Dye laser DYE-SF-007 pumped by DPSS DMPLH laser installed in the brand new group of Dr. Dajun Wang at the The Chinese University of Hong Kong. DYE-SF-077 features exceptionally narrow generation line width, which amounts to less than 100 kHz. DYE-SF-077 sets new standard for generation line width of commercial lasers. Prior to this model, the narrowest line-width of commercial dye lasers was as broad as 500 kHz - 1 MHz. It is necessary to note that the 100-kHz line-width is achieved in DYE-SF-077 without the use of an acousto-optical modulator, which, as a rule, complicates the design and introduces additional losses. A specially designed ultra-fast PZT is used for efficient suppression of radiation frequency fluctuations in a broad frequency range. DYE-SF-077 will be used in resaerch of Ultracold polar molecules, Bose-Einstein condensate and quantum degenerate Fermi gas and High resolution spectroscopy |
Other News
Optical Society of Southern California meeting at UCSD OSSC 2011-04-27
Nd:YAG laser ordered by the University of Leon, UANL, Mexico
Wedge 50 Multipass Amplifier pumped with a Darwin-527-30-M DPSS Laser
ordered by Hong Kong customer
New
Trestles LH10-fs/CW femtosecond+CW laser ready for delivery to the
University of California Santa Cruz
Trestles femtosecond
Ti:Sapphire laser delivered to North Carolina State
University
Del Mar Photonics sponsor IONS (International OSA Network of Students)
conference IONS-NA-2 in Tucson, Arizona
IONS-NA-2
website
Best talk and best
poster awards at IONS-Moscow 2010 conference sponsored by Del Mar Photonics
Watch Del Mar Photonics
videos!
Del Mar Photonics is now on Twitter!
Del Mar Photonics featured components
Del Mar Photonics continuously expands its components portfolio.
|
Solar
Prisms for Concentrating Photovoltaic Systems (CPV) Solar cells made of compound semiconductors such as gallium arsenide are very expensive. Usually very small cells are installed and various means such as mirrors, lenses, prisms, etc..are used to concentrate sunlight on the cells. Concentration photovoltaic technology (CPV) uses the solar radiation with an efficiency of 40%, double that of conventional solar cells Del Mar Photonics design custom Concentrating Photovoltaic Systems (CPV) and supply variety of the optical components for CPV such as solar prisms shown in the picture. |
|
Axicon Lens Axicon lens also known as conical lens or rotationally symmetric prism is widely used in different scientific research and application. Axicon can be used to convert a parallel laser beam into a ring, to create a non diffractive Bessel beam or to focus a parallel beam into long focus depth. Del Mar Photonics supplies axicons with cone angles range from 130° to 179.5° for use with virtually any laser radiation. We manufacture and supply axicons made from BK7 glass, fused silica and other materials. download brochure - request a quote |
Rutile (TiO2) coupling
prisms Del Mar Photonics offers optical elements made of high quality synthetically grown Rutile Titanium Dioxide crystals. Rutile’s strong birefringency, wide transmission range and good mechanical properties make it suitable for fabrication of polarizing cubes, prisms and optical isolators. Boules having high optical transmission and homogeneity are grown by proprietary method. Typical boules have 10 - 15 mm in dia. and up to 25 mm length. Optical elements sizes - from 2 x 2 x 1 mm to 12.7 x 12.7 x 12.7 mm. Laser grade polish quality is available for finished elements. So far we the largest elements that we manufactured are 12 x15 x 5 mm, in which optical axis is parallel to 15 mm edge, 5 mm is along beam path, 12 x 15 mm faces polished 20/10 S/D, one wave flatness, parallelism < 3 arc.min. (better specs. available on request). more details - download brochure - request a quote |
|
Vacuum viewport Del Mar Photonics offer a range of competitively priced UHV viewports , Conflat, ISO or KF including a variety of coatings to enhance performance. Del Mar Photonics viewports are manufactured using advanced techniques for control of special and critical processes, including 100 percent helium leak testing and x-ray measurements for metallization control. Windows Materials include: Fused silica, Quartz , Sapphire , MgF2, BaF2, CaF2, ZnSe, ZnS, Ge, Si, Pyrex. Standard Viewing diameters from .55" to 1.94 ". Coating - a range of custom coatings can applied - which include - Single QWOT - Broad Band AR - V coatings - ITO - DLC (Diamond like coating) more details - request a quote |
|
|
Hydrogen
Thyratrons are used in
such devices as radars with different power levels, high-power pulsed
technical, electrophysical, medical devices and lasers. Sophisticated
design and high quality ceramic-metal envelope determines long lifetime
and very accurate and reliable operation of hydrogen thyratrons under wide range of environmental
conditions. Applications: - radars - pulsed lasers power supplies - medical apparatus - electrophysical instrumentation Triggered Three-Electrode Spark Gap Switches are ceramic-metal sealed off gas discharge trigatron-type devices with a co-axial trigger electrode. These Gas Discharge Tubes contain no mercury and, due to an advanced design, feature high reliability and a long lifetime being operating under wide range of environmental conditions. Applications: - pulsed installation for processing materials - installations with plasma focus - pulse power supplies for lasers and other pulse equipment - medical apparatus such as lithotriptors and defibrillators - processing systems for petroleum wells |
We are looking forward to hear from you and help you with your optical and crystal components requirements. Need time to think about it? Drop us a line and we'll send you beautiful Del Mar Photonics mug (or two) so you can have a tea party with your colleagues and discuss your potential needs. |
Del Mar Photonics, Inc.
4119 Twilight Ridge
San Diego, CA 92130
tel: (858) 876-3133
fax: (858) 630-2376
Skype: delmarphotonics
sales@dmphotonics.com